Oval plastic light fixture with soft white lens with switch through lens hole.
Extremely low surface mount profile for RV and boat lighting.
Bright 650 Lumens - compares to a 75 watt incandescent light.
The soft white lens produces an amazingly even light pattern without glare or shadow.
Dimmable with a PMW dimmer (pulse width modified dimmer)
replace rv led 12v double dome dimmer light ceiling fixture camper trailer
MADE IN USA
Installation instructions for the BeeGreen Thinly 3301 12 volt LED Light
To remove the lens for installation, or to gain access for servicing, insert a small flat blade screwdriver between the lens and the fixture housing as shown – on the “far side” (opposite side) from the switch, and pry gently. If the lens starts pops loose but is crooked and won’t pull free, level the lens somewhat and flip the fixture over. Gravity should drop the lens. Four mounting holes are provided to securely screw mount the fixture.
To reinstall the lens, install the switch side first, seating the nubs on the side of the lens into the frame, and seating the lens hole over the switch. Then snap the “far side” in.